Anthony Nixon
2018-01-26 22:19:07 UTC
Hi all,
I've been using PICkit3 and IPE to program a PIC18F chip via ICSP for
a project. All seemed to work fine.
I noticed a problem in my code whereby the wrong character was being
received from the serial port to the PC. I could not find out why this
occurred so I used IPE to verify the chip and was reported as ok.
After much head scratching and still no joy, I reprogrammed the chip
with the same HEX code and now the problem is fixed and IPE still
verifies ok.
Also unless I am missing something, it won't let you read a chip
unless a HEX file has been loaded.
Anyone else had problems.
cheers
Tony
I've been using PICkit3 and IPE to program a PIC18F chip via ICSP for
a project. All seemed to work fine.
I noticed a problem in my code whereby the wrong character was being
received from the serial port to the PC. I could not find out why this
occurred so I used IPE to verify the chip and was reported as ok.
After much head scratching and still no joy, I reprogrammed the chip
with the same HEX code and now the problem is fixed and IPE still
verifies ok.
Also unless I am missing something, it won't let you read a chip
unless a HEX file has been loaded.
Anyone else had problems.
cheers
Tony
--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist