Dwayne Reid
2018-01-19 22:50:39 UTC
Good day to all.
The following is a post I recently made on the Microchip Forums. No
help there, so I'm trying here.
The only suggestion from the forum was to make sure that I had the
"Program in Absolute Mode" box checked - it was. No other suggestions so far.
Original post follows:
I am a long-timer user of MPLAB - all versions prior to
MPLAB-X. Most recent projects are built using MPLAB 8.92.
However, I want to use debug hardware that operates only with
MPLAB-X. I'm biting the bullet and trying to wrap my head around the
new paradigm. I've just upgraded MPLAB-X to version 4.05.
My current problem is that I can't see Global Symbols when adding
variables to a watch window. My source is straight assembler, built
in Absolute mode. All variables are declared using a "cblock / endc"
section in my code. I'm not using re-locatable code nor am I using the linker.
How to force MPLAB-X to make Global Symbols available for use in watch windows?
Many thanks!
dwayne
--
Dwayne Reid <***@planet.eon.net>
Trinity Electronics Systems Ltd Edmonton, AB, CANADA
780-489-3199 voice 780-487-6397 fax 888-489-3199 Toll Free
www.trinity-electronics.com
Custom Electronics Design and Manufacturing
The following is a post I recently made on the Microchip Forums. No
help there, so I'm trying here.
The only suggestion from the forum was to make sure that I had the
"Program in Absolute Mode" box checked - it was. No other suggestions so far.
Original post follows:
I am a long-timer user of MPLAB - all versions prior to
MPLAB-X. Most recent projects are built using MPLAB 8.92.
However, I want to use debug hardware that operates only with
MPLAB-X. I'm biting the bullet and trying to wrap my head around the
new paradigm. I've just upgraded MPLAB-X to version 4.05.
My current problem is that I can't see Global Symbols when adding
variables to a watch window. My source is straight assembler, built
in Absolute mode. All variables are declared using a "cblock / endc"
section in my code. I'm not using re-locatable code nor am I using the linker.
How to force MPLAB-X to make Global Symbols available for use in watch windows?
Many thanks!
dwayne
--
Dwayne Reid <***@planet.eon.net>
Trinity Electronics Systems Ltd Edmonton, AB, CANADA
780-489-3199 voice 780-487-6397 fax 888-489-3199 Toll Free
www.trinity-electronics.com
Custom Electronics Design and Manufacturing
--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist